100,000+ happy customers worldwide | 3m+ Barcodes sold globally | 10,000+ scans each day

 
Thousands of happy customers Worldwide | 3m+ Barcodes sold globally | 10,000+ scans each day

Barcode Artwork Test

A reprint costs many times as much as a barcode. This test is the cheap way to find out whether your artwork is right, while changing it is still free.

You email us a PDF of your barcode artwork. We print it on a laser printer in black and white, test it on calibrated verification equipment, and email you the report — the same measurements and the same grade an official verification report gives you.

  • Thousands of happy customers Worldwide | 1m+ Barcodes sold globally | 10,000+ scans each day

    Barcode Artwork Test

    We have a new service where we can test your barcode artwork, to give you an idea of whether it will scan well.

    This is not an official Barcode Verification Report (which costs $59) as required by some Supermarket and Hardware chains. But is is a test using the same equipment and giving the same information.

    This test will be done on your artwork – so you can have more confidence about the quality of the barcode before you go to print – or it will tell you what problems there are with the barcode artwork.

    To do this test, please purchase the quantity you require ($20 each), and then email a pdf of the barcode artwork to us. The pdf must be A4 or smaller in size, and 100%. We will print it on a laser printer in B&W (so it won’t test any other print colours) and test it, then email the report to you.

    You can view some sample reports below. Grades vary from A (excellent) to C (OK) to D & below which are fails.

    Test Pass A grade
    Test Pass B grade
    Test Pass C grade
    Test Fail Decodability
    Test Fail Right Margin
    Test Fail modulation and magnification

     

    Add to cart

Is this the right test for you?

You’re about to send packaging to print — yes. This is what the test is for.

A retailer has asked you for a verification report — no. You need the official barcode verification report, printed on the packaging, for $59 USD. This test won’t satisfy them.

Your packaging is already printed — the artwork test tells you nothing useful at that point. Go to verification instead.

You just want to know your barcode image is the right size — check it against our EAN-13 specifications first. That’s free, and it catches the most common problem on its own.

What to send

  • A PDF of the barcode artwork
  • A4 or smaller
  • At 100% — not scaled to fit the page

Order the quantity you need, then email us the PDF. Scaling is the thing to watch: a barcode that has been shrunk to fit an A4 sheet will test as the wrong size, and the report will tell you about a problem you don’t have.

What you get back

A report giving an overall grade and the individual measurements behind it. Grades run from A down through F, where A to C are passes and D and below are fails. Where it fails, the report names the parameter that caused it — decodability, modulation, magnification, quiet zone — so you know what to change.

Sample reports:

What this test will not tell you

Worth being clear about, because it’s the difference between the two products.

We print your artwork in black and white on a laser printer. That means the test covers the barcode itself — its dimensions, quiet zones, bar edge definition and decodability — but not how your actual print run will behave.

It won’t catch problems caused by your print colours, your substrate, ink spread on absorbent stock, a curved or reflective surface, or a symbol printed across a seam or fold. Those only show up on the finished packaging, which is what the $59 verification report is for.

A clean pass here makes a later verification much more likely to pass. It doesn’t replace it.

Common questions

Which one do I need, this or the $59 report? If a retailer asked for a report, you need the $59 verification. If you’re checking your own work before print, this one.

Can I test several barcodes at once? Yes. Buy one test per barcode.

What if it fails? Correct the artwork and re-test. Each test is a separate purchase, but most failures are due to a size or quiet-zone issue that costs nothing to fix in the file.

Will a pass here guarantee a retailer accepts my barcode? No. Retailers who require verification want a report on the printed pack. This is a check on your artwork, not a document to hand over.